|
|
Moved the "24hr: yes" proc output from drivers to rtc
proc code. This is required because the time value
in the proc output is always in 24hr mode regardless
of the driver.
Signed-off-by: Alessandro Zummo <a.zummo@xxxxxxxxxxxx>
Cc: Lennert Buytenhek <buytenh@xxxxxxxxxxxxxx>
---
drivers/rtc/rtc-ep93xx.c | 1 -
drivers/rtc/rtc-m48t86.c | 3 ---
drivers/rtc/rtc-pcf8563.c | 7 -------
drivers/rtc/rtc-proc.c | 2 ++
drivers/rtc/rtc-rs5c372.c | 5 ++---
drivers/rtc/rtc-test.c | 1 -
drivers/rtc/rtc-x1205.c | 2 --
7 files changed, 4 insertions(+), 17 deletions(-)
--- linux-rtc.orig/drivers/rtc/rtc-ep93xx.c 2006-03-29 02:14:50.000000000
+0200
+++ linux-rtc/drivers/rtc/rtc-ep93xx.c 2006-03-29 02:40:12.000000000 +0200
@@ -67,7 +67,6 @@ static int ep93xx_rtc_proc(struct device
ep93xx_get_swcomp(dev, &preload, &delete);
- seq_printf(seq, "24hr\t\t: yes\n");
seq_printf(seq, "preload\t\t: %d\n", preload);
seq_printf(seq, "delete\t\t: %d\n", delete);
--- linux-rtc.orig/drivers/rtc/rtc-pcf8563.c 2006-03-29 02:14:50.000000000
+0200
+++ linux-rtc/drivers/rtc/rtc-pcf8563.c 2006-03-29 02:40:27.000000000 +0200
@@ -227,14 +227,7 @@ static int pcf8563_rtc_set_time(struct d
return pcf8563_set_datetime(to_i2c_client(dev), tm);
}
-static int pcf8563_rtc_proc(struct device *dev, struct seq_file *seq)
-{
- seq_printf(seq, "24hr\t\t: yes\n");
- return 0;
-}
-
static struct rtc_class_ops pcf8563_rtc_ops = {
- .proc = pcf8563_rtc_proc,
.read_time = pcf8563_rtc_read_time,
.set_time = pcf8563_rtc_set_time,
};
--- linux-rtc.orig/drivers/rtc/rtc-proc.c 2006-03-29 02:14:50.000000000
+0200
+++ linux-rtc/drivers/rtc/rtc-proc.c 2006-03-29 02:39:56.000000000 +0200
@@ -71,6 +71,8 @@ static int rtc_proc_show(struct seq_file
alrm.pending ? "yes" : "no");
}
+ seq_printf(seq, "24hr\t\t: yes\n");
+
if (ops->proc)
ops->proc(class_dev->dev, seq);
--- linux-rtc.orig/drivers/rtc/rtc-rs5c372.c 2006-03-29 02:14:50.000000000
+0200
+++ linux-rtc/drivers/rtc/rtc-rs5c372.c 2006-03-29 02:46:57.000000000 +0200
@@ -151,9 +151,8 @@ static int rs5c372_rtc_proc(struct devic
{
int err, osc, trim;
- seq_printf(seq, "24hr\t\t: yes\n");
-
- if ((err = rs5c372_get_trim(to_i2c_client(dev), &osc, &trim)) == 0) {
+ err = rs5c372_get_trim(to_i2c_client(dev), &osc, &trim);
+ if (err == 0) {
seq_printf(seq, "%d.%03d KHz\n", osc / 1000, osc % 1000);
seq_printf(seq, "trim\t: %d\n", trim);
}
--- linux-rtc.orig/drivers/rtc/rtc-x1205.c 2006-03-29 02:38:39.000000000
+0200
+++ linux-rtc/drivers/rtc/rtc-x1205.c 2006-03-29 02:39:46.000000000 +0200
@@ -451,8 +451,6 @@ static int x1205_rtc_proc(struct device
{
int err, dtrim, atrim;
- seq_printf(seq, "24hr\t\t: yes\n");
-
if ((err = x1205_get_dtrim(to_i2c_client(dev), &dtrim)) == 0)
seq_printf(seq, "digital_trim\t: %d ppm\n", dtrim);
--- linux-rtc.orig/drivers/rtc/rtc-m48t86.c 2006-03-29 02:14:50.000000000
+0200
+++ linux-rtc/drivers/rtc/rtc-m48t86.c 2006-03-29 02:42:37.000000000 +0200
@@ -127,9 +127,6 @@ static int m48t86_rtc_proc(struct device
reg = ops->readb(M48T86_REG_B);
- seq_printf(seq, "24hr\t\t: %s\n",
- (reg & M48T86_REG_B_H24) ? "yes" : "no");
-
seq_printf(seq, "mode\t\t: %s\n",
(reg & M48T86_REG_B_DM) ? "binary" : "bcd");
--- linux-rtc.orig/drivers/rtc/rtc-test.c 2006-03-29 02:14:50.000000000
+0200
+++ linux-rtc/drivers/rtc/rtc-test.c 2006-03-29 02:42:54.000000000 +0200
@@ -49,7 +49,6 @@ static int test_rtc_proc(struct device *
{
struct platform_device *plat_dev = to_platform_device(dev);
- seq_printf(seq, "24hr\t\t: yes\n");
seq_printf(seq, "test\t\t: yes\n");
seq_printf(seq, "id\t\t: %d\n", plat_dev->id);
--
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at www.tux.org/lkml/">http://www.tux.org/lkml/
|
|